Shenzhen Mine Technology Co., Ltd.
Main products:USB DVR Box,HDMI Capture Card,HDMI Converter,Video Converter
Products
Contact Us
  • Contact Person : Ms. Zeng Sophie
  • Company Name : Shenzhen Mine Technology Co., Ltd.
  • Tel : 86-755-83271813
  • Fax : 86-755-83048160
  • Address : Guangdong,Shenzhen,Room 26K,Moden window Building
  • Country/Region : China
  • Zip : 518102

Professiional industrial camera VGA output apply to Hospitals, schools and scientific research departments

Professiional industrial camera VGA output apply to Hospitals, schools and scientific research departments
Product Detailed
Professiional industrial camera VGA output apply to Hospitals, schools and scientific research departments OEM accept

Professiional  industrial camera VGA output apply to Hospitals, schools and scientific research departments

 OEM accept

Specifications:

type

DVSP778

Image sensor

1300000 pixel, Color cmos,effective pixels1280(H)*1024(V)

Definition

Over 600 lines

Image refresh rate

 25 fb/s

SNR 

>60dB 

Video port

Standard VGA port

VGA output

1024X768 60Hz(default),1024X768 75Hz,1280X1024 60Hz

Lens mount

CS 

Control function

Brightness and color balance,saturation,sharp degrees,Cb(blue)offset,Cr(red) offset,cursor,vertical,horizontal,negative

Power supply

5V DC Allow 10% deviation

Working current

400mA

Power

2W

Size

50*50*90(mm)

Surveying operation:.Setting:       Under system menu ¡°cross cursor¡±to choice then can be disply;cross line colour,double cross line color. moving line color:can optional any moving line color;calibration length:a basis of surveying distance,if calibration more longer and precision more high

2.Calibration:  Put the calibrator under camera,first calibration X axle£» press CAL button until 3 munites ,on screen can be display:standard type DX,length=**mm;through SEL,,button to adjust the paralla line between distance equal to calibration length,and press CAL button,on the left screen can show the calibration OK,then into Y axle calibration£¬same with calibration X ,little different is when you press on CAL button then off,should be continuous 5 times.

3.Surveying:  Put the surveying under camera,keeping enlargement factor,then adjust the lens,then through  SEL  button to move the 2 parallel lines survey distance.Attention:under surveying don't change the enlargement factor,if changed,should be take a calibration again

 Applications:

*      Electrical and mechanical surface area to Enlarge imaging.

*   PCB IC assembly and the quality inspection.

*   Experiment, examine and analyse in  Hospitals, schools and scientific research departments.

*      Printing detect and  Jewels identify.

Professiional industrial camera VGA output apply to Hospitals, schools and scientific research departments



Copyright Notice @ 2008-2012 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.